Joined in 2023 
82 
63 About this deal
MAXIMUM PRESENCE WITH MINIMUM HASSLE:
HELPDESK 📱 +63 917 544 7887 📞 +63 82 285 4986 📱 +63 917 544 7887 - (VIBER) The dual-chamber design means there is ample space for routing unsightly cables behind the motherboard tray, which is also where the PSU is concealed. The inside of the O11 Air Mini is modular which means it can be configured to suit your hardware and cooling requirements. It’s smaller in size than the existing O11 Air while still providing excellent hardware support and airflow.
MINI SIZE AND MAXIMUM COMPATIBILITY:
- Compact size and minimalistic design that’s ideal for small desks
- Super fine mesh prevents dust build up inside the case
- With an ATX motherboard only 240mm radiators can be installed in the bottom.
- The VGA-Vertical Bottom Mode gives only 20mm clearance and does not allow for fan or radiator installation.
- When using an ATX motherboard, the bottom radiator can only be 240mm, but with ITX and M-ATX you can install up to a 280mm radiator.
- With any motherboard it does not allow fan or radiator support in the bottom.
- Vertical GPU Support – bracket and riser cable sold separately
- The 7 Slot Mode has space for up to ATX motherboards.
- Excellent hardware support from the Modular Dual chamber design
- The 5 Slot Mode is ideal for ITX and M-ATX motherboards and allows up to 280mm radiators to be installed at the top.
Reviews
plumb and fixit
The inside of the case is large and the radiator is a fan, and the number of fans is more than double that of Sandwich and Elite, so it may be natural for it to cool down if you do this alone, but the temperature drops and the fan I think it's a good case because it rotates at a low speed. Btw.
Alexander Spengler
This case is great for atx builds but I personally would not use an e-atx motherboard with it as I feel like there would be some clearance issues with the top and bottom mounted fans, also due to the smaller vertical height it is just quite a bit wider that a traditional case and is a bit expensive for the size and features but is very easy to build in and swap out parts due to the tool less panels and meshes andwould definitely recommend this case for anyone looking for good cooling in a smaller form factor 👍 If you manage to get LianLi Air Mini in perfect condition, you will love how well is design and how easy is to built in it. If you wondering about NH-D15 clearance to the glass!
Michael Mansfield
Incidentally, there was a fan under the grabo, so when I measured the temperature with the high-quality 4K of the FF15 bench, it was about 10 degrees lower at a maximum of 75 degrees. . Full ATX E-ATX motherboard, ATX PSU, largest GPU (Strix 4090) and largest air cooler (NH-D15), this is by-far, the smallest footprint case there is and cable management is absolutely breeze.
佐藤
Expensive when you consider the vertical gpu mount. Unfortunately, my first case came majorly damaged and I wasn't sure I want it to reorder, but I'm glad I did. This case is the most interesting Thing in my pc-world which I've ever met. IT WAS PERFECT.
simon
I love how proportional all components look, everything seem to be in the right place without leaving a whole lot empty space. Note It is stated that EATX will fit, but if you attach a radiator and fan to the side part, there will be no gap for the cable to pass through. COMPACT MORE SPACIOUS! Keep in mind, this review comes from very meticulous person who owns 3 Caselabs cases, unfortunately no longer produced, but if you have any idea of Caselabs cases quality and how they where built you will appreciate this review.
Wagner L Mendes
I'm an airflow enthusiast, an minimal decent rgb fan and a perfectionist when it comes to do an artwork with whatever you want. I can't believe, that a product like this case is R E A L in our trash-is-the-best-society. Return the radiator to the original 280 and install it with a sandwich because there is space in the front, and when it starts, it is 2 to 3 degrees lower in the idle state, about 10 degrees lower when the load is applied for 10 minutes with the CINEBENCH R23 It's gone. Great case the best i have owned so far.
rowan gallr
I have Corsair LPX Vengeance DDR4 RAM so both fans fit nicely, there is about 2-3 mm space between fans and glass so plenty of room. Lots of options for watercooling.
Related:
Great Deal 
New Comment